Wood stains today are required to meet the environmental standard of lower volatile organic compounds. Linked to pollution, smog and respiratory problems, VOCs also cause headaches and dizziness. Some may even be carcinogenic. Some of the nation’s top stains in the industry today just meet this environmental standard.
When compared, EXPERT’s 5% solvent, ultra-low VOC rating <250 g/l comes out on top, followed by three of the national leading industry brands at 35% solvent, and <350 g/l 55%, with <550 g/l and 70% solvent with <700 g/l.
GET REAL PEACE-OF-MIND.
Maintain wood’s beauty and integrity with ultra-low VOC oil-based stains from EXPERT. Stain professionals’ and homeowners’ real peace-of-mind comes from knowing that exterior wood projects, and their immediate and global environments are safeguarded against higher off gas levels, keeping them beautifully protected during and after application, for up to three years.
EXPERT Stain & Seal is made by experts for experts, and the homeowners who demand and expect real results.
SEMI-TRANSPARENT
DEEP PENETRATING OIL FORMULA FOR FENCES, DECKS, SIDING, SHAKES & LOG HOMES
COVERAGE RATES
Coverage rate for most projects will be:
125-150 square feet per gallon on rough cut lumber projects
175-200 square feet per gallon on smooth cut lumber projects
APPLICATION METHOD
The best application method is to use an airless sprayer and to apply a flood coat, which means to spray the board until it stops absorbing. The excess will bead up and run off without causing streak marks.
Mix contents well before use, stir contents often during use. Stir thoroughly, as pigment concentrations may settle. DO NOT THIN THIS PRODUCT. If using multiple pails of stain, mx them for consistent color uniformity. Apply using a brush, roller, stain mitt, stain applicator pad, or sprayer. Apply one coat by fully saturating the wood surface with a generous amount of stain. DO NOT ALLOW THE STAIN TO POOL OR PUDDLE ON FLAT SURFACES. Remove or spread out any stain left on the wood surface after 30-60 minutes. EXPERT Stain & Seal self levels on vertical surfaces, while back brushing may be required on horizontal surfaces. Using a dry cloth, remove puddled or excess stain after application from flat, horizontal surfaces. If not removed it may leave a shiny film on the surface, delay drying time, and cause premature failure.
EXPERT Stain & Seal's penetrating oils go deep into the wood, drying slowly for several days after application. Finished color can take up to several weeks for true color. DO NOT walk on stained surfaces for 24 hours, allowing 72 hours for light traffic.
Wood stains today are required to meet the environmental standard of lower volatile organic compounds. Linked to pollution, smog and respiratory problems, VOCs also cause headaches and dizziness. Some may even be carcinogenic. Some of the nation’s top stains in the industry today just meet this environmental standard.
When compared, EXPERT’s 5% solvent, ultra-low VOC rating <250 g/l comes out on top, followed by three of the national leading industry brands at 35% solvent, and <350 g/l 55%, with <550 g/l and 70% solvent with <700 g/l.
GET REAL PEACE-OF-MIND.
Maintain wood’s beauty and integrity with ultra-low VOC oil-based stains from EXPERT. Stain professionals’ and homeowners’ real peace-of-mind comes from knowing that exterior wood projects, and their immediate and global environments are safeguarded against higher off gas levels, keeping them beautifully protected during and after application, for up to three years.
EXPERT Stain & Seal is made by experts for experts, and the homeowners who demand and expect real results.
SEMI-TRANSPARENT
DEEP PENETRATING OIL FORMULA FOR FENCES, DECKS, SIDING, SHAKES & LOG HOMES
COVERAGE RATES
Coverage rate for most projects will be:
125-150 square feet per gallon on rough cut lumber projects
175-200 square feet per gallon on smooth cut lumber projects
APPLICATION METHOD
The best application method is to use an airless sprayer and to apply a flood coat, which means to spray the board until it stops absorbing. The excess will bead up and run off without causing streak marks.
Mix contents well before use, stir contents often during use. Stir thoroughly, as pigment concentrations may settle. DO NOT THIN THIS PRODUCT. If using multiple pails of stain, mx them for consistent color uniformity. Apply using a brush, roller, stain mitt, stain applicator pad, or sprayer. Apply one coat by fully saturating the wood surface with a generous amount of stain. DO NOT ALLOW THE STAIN TO POOL OR PUDDLE ON FLAT SURFACES. Remove or spread out any stain left on the wood surface after 30-60 minutes. EXPERT Stain & Seal self levels on vertical surfaces, while back brushing may be required on horizontal surfaces. Using a dry cloth, remove puddled or excess stain after application from flat, horizontal surfaces. If not removed it may leave a shiny film on the surface, delay drying time, and cause premature failure.
EXPERT Stain & Seal's penetrating oils go deep into the wood, drying slowly for several days after application. Finished color can take up to several weeks for true color. DO NOT walk on stained surfaces for 24 hours, allowing 72 hours for light traffic.
Read Less
